Protect Your Pipes (What You Want To Know Wednesdays)

Protect Your Pipes for winter

Cold weather can wreak havoc on your home.  It is recommended to winterize your pipes to avoid freezing and breaks if your home will be vacant for a long period of time.   You can also insulate your pipes to help prevent freezing.  You can get pre-slit pipe foam at your local hardware store.  The Balance.com created an informative list of tips and steps to help you winterize your plumbing.

Follow these steps to winterize plumbing pipes in a house:

  1. Shut off the main water valve, turn off the water pump and the water heater. This will protect heating elements in the water heater when there is no water inside the tank.
  2. Open all drain valves and all taps. Check off each from your list so you are sure all taps are open. A closed tap could create a vacuum that will hold water inside of pipes. All valves and taps should remain open throughout the winter.
  3. Using air compressors, blow excess water standing out of the pipes.
  4. Open the drain valve in your hot water tank and let it discharge until it is empty. Be careful, because sometimes these hot water tanks don’t have floor drains and you will need to connect a garden hose to it.
  5. Drain all the water that is left inside the holding tank, especially the one located in the rubber diaphragm, the one that is used along with the water tank to build pressure. As an additional protective measure, add antifreeze to the jet pump case.
  6. Flush toilets to remove as much water as you can from the tanks and the toilet bowls. If all water cannot be removed, add antifreeze to prevent any water from freezing and cracking the toilet.
  7. Check all sink and tub drains that could have drain traps. Add some antifreeze on each one of them to prevent water from freezing and cracking in the traps

 

How to Prevent Freezing Pipes

If you have enough time to check the conditions of the building's plumbing, identify the pipes most vulnerable to freezing. Look for pipes located outside walls and windows, uninsulated pipes and pipes installed near unheated spaces.

It is also important to check for any cracks or openings in walls, floors and ceilings. If you find holes during your inspection, caulk them to keep cold air from entering those gaps.

Be sure to follow these tips:

  1. Insulate pipes with insulation sleeves, wrapping or slip-on foam pipe insulation. Do not leave any gaps without insulation as cold air can affect the pipe in these spaces. Plastic piping is more tolerant of freezing than old copper or steel water pipes.
  2. Maintain a heating source inside the building to protect pipes against cold.
  3. Use heat tape to protect pipes from freezing. Heat tape is one of the preferred methods for winterizing plumbing, but be aware that these might bring additional hazards. The U.S. CPSC has provided safety recommendations for homeowners using heat tapes to help prevent fires.

 *thebalance.com


* Specific loan program availability and requirements may vary. Please get in touch with your mortgage advisor for more information.